Plaster Systems

Tape Joints First Coat

Paper tape joints produce stronger and more enduring results than those that are set with fibreglass tapes.

BGC Plasterboard recommends the use of paper tapes.

• Self-adhesive paper tapes should not be used.
• Where fibreglass tape joints are used, they must be back blocked before the joints are set (in accordance with the instructions set out in Back Blocking.

Tape & First Coat

Apply the BGC Base Coat bedding cement to fully fill the recess of the joint.

Centrally bed the perforated paper tape into bedding coat and remove any air bubbles. Apply additional cement and cover lightly with BGC Base Coat.

Stop-up all fixing points and apply BGC Base Coat to any damaged areas.

Allow the BGC Base Coat to set and dry for a minimum of 24 hours in damp or humid conditions or 1 hour for setting type cements (or as per compound manufacturer’s recommendation).