Allow the BGC Top Coat to dry at least 24 hours.

Lightly sand smooth with 150 grit paper or with 220 sanding mesh.

Wipe off excess dust with a slightly damp cloth.

BGC Plasterboard will perform to the architects’ specification and the Australian Building Codes, provided all procedures are followed as per the compound manufacturers’ specification.

Water-based acrylic gypsum plaster adhesives such as BGC Stud Adhesive, which comply with AS2753, are suitable for fixing BGC Plasterboard to both metal and timber framing.

BGC Plasterboard may be fixed to the framing with either adhesive and nails or adhesive and screws as appropriate.

If you choose to install BGC products yourself, ask our friendly staff for advice to get you started.

The post Sanding and Finishing appeared first on Plaster Systems.