Plaster Systems

Corner Details Decoration

BGC Plasterboard will perform to the architects’ specification and the Australian Building Codes, provided all procedures are followed as per the compound manufacturers’ specification.

Decoration

BGC Plasterboard does not recommend spray painting to achieve level 4 or higher finish. Ensure all stopping of joints and nail holes is completed to AS/NZ 2589:2007. Brush down area prior to painting to ensure board is free from sanding dust.

Roller apply a proprietary branded quality sealer, to the entire sheet area including joints, followed by two coats of full weight flat acrylic paint.

Choice of colour should be considered carefully – darker colours will exacerbate any defects and highlight any imperfections.

Where high humidity is of concern, ensure the chosen painting system will protect joints from moisture absorption.

Inner Corner & External Corner Details