Plaster Systems

Plasterboard Cornice Fixing Details

Clean down area where cornice is to be applied, remove any excess render or loose material.

Mark a guide line to suite the bottom edge of the cornice (90, 75 or 55 down) and pre-cut lengths as required.

All corner joints, internal and external, are to be mitred. Where butt joints are unavoidable, ensure both ends are prepared to align accurately.

Apply (butter) a 10mm bead of cornice cement to both long edges and ends of the cornice.

Locate cornice to guide lines and temporarily block as required.
Fill mitres, cleaning off excess cement as you go.

Remove temporary blocking after BGC Cornice Cement has set.

Apply second topping coat to mitres and joints as required.

Note: only ever butter one length at a time and install immediately.

Contact surface may require damping down prior to fixing cornice, depending on drying conditions.

Cove Cornice

BGC Plasterboard Cove Cornice is designed to give a clean continuous line at the junction of walls and ceilings, and can be used with confidence on both Plasterboard lining and cement plastered walls alike.

BGC Plasterboard Cove Cornice is made of a plaster core with paper face to complement BGC Plasterboard and Ceilingboard. Cove Cornice should be fixed using BGC Cornice Cement with few special tools required.

The use of a mitre box and hand saw for cutting internal and external corner mitres is recommended.

Decorative Cornice

The Decorative Cornice range from BGC Plasterboard adds the finishing touch to the interior décor of your new home or renovation.

Esperance provides a timeless design suiting many different styles of home. The soft undulation of the curve provides a stylish finish to any room.

For the bolder finish, don’t look any further than the Albany decorative cornice. With dramatic steps and bold curves, Albany creates an eye catching feature in a room.

Cove Cornice & Decorative Cornice Images