Plaster Systems

Considerations Security Tips

Before lining the building it is prudent to consider the following design and construction issues:

• Consideration must be given to the framing, this may vary throughout Australia especially in high wind and coastal areas.
• It is highly recommended to batten out the ceiling with Rondo 16mm metal battens or 16mm Furring Channel or 28mm Furring Channel or equivalent.These are to be fixed on the appropriate direct fix clips.
• High-pressure differentials across a wall, may cause the wall to bend and move.
  Ensure that wall and ceiling areas do not exceed maximum allowable areas, heights or lengths, and provide movement and or relief control joints where necessary.
• Decoration is as important as the plasterboard installation and is vital in protecting both plasterboard and the set trowelled areas. The surface of the installed plasterboard ceiling should be decorated with an approved exterior grade paint. Please refer to your paint manufacturer for the appropriate grade required.

Alfresco Coffer Detail